John & Shirley Introduce The AMS-Oiler(TM) And
Marine Dual Remote Bypass Filtratation System.

We previewed a prototype of the AMS-Oiler(TM) at The 64th Annual The Miami International Boat Show in February 2004. Aproximately 157,000 people were there. Everyone who saw it, loved it, and wanted it--ASAP.

And so will you.

It's great for marine uses and much more.

AMSOIL decided to finish its full development and bring it to market. It's here now.

Order your AMS-Oiler (TM) following the link below.

Click Here For The Alquist Online Order Center to buy AMSOIL products now.

What exactly is an AMS-Oiler? It's a high tech oil pre-charger, which helps to prevent engine dry starts, which cause long term engine damage.

AMSOIL's wonderful synthetic oils, and its new Marine Dual Remote Filtration System filters, and the AMS-Oiler(TM) are a potent prescription of anti-aging medicine for your expensive engines.

You can buy as many as you want. There's no limit.

See AMSOIL's complete description below of the AMS-Oiler (TM) below:

The needs of automotive and industrial equipment have continued to place increasing demands on the lubrication industry. Over the years, AMSOIL research and development has responded to changes in the industry by developing products that keep AMSOIL on the cutting edge. The new AMS-Oiler™ is the most recent example in a long line of top-quality innovations from AMSOIL.

Independent studies have concluded that engine wear during start-up is a major concern. Even though engine components remain dry for only a short period of time at ignition, when this circumstance is multiplied by the 400 to 600 dry starts a year by the average motorist, the potential for harmful metal-on-metal contact and significant wear is great.

The AMS-Oiler™ is an oil pre-charger that puts an end to dry-engine starting. Typically, an engine that sits idle for even a short period of time will operate relatively dry upon starting before oil is able to fully lubricate the system. In fact, the automotive industry estimates that up to 50 percent of engine bearing wear occurs during the starting process.

Indeed, the superiority of AMSOIL motor oils minimizes start-up wear by clinging to the metal surfaces, but even more can be done to concentrate the oil on the critical wear areas in an engine. With the AMS-Oiler in place, 160 cubic centimeters of oil is injected directly on the engine bearings and other wear sensitive surfaces upon turning of the key, giving instant protection to vital engine components.

The AMS-Oiler outperforms gas and charge systems. When the ignition key is turned to the on position, an audible alarm sounds while a 12-volt DC solenoid initiates the AMS-Oiler's operation. When the oil delivery process is complete, the alarm ceases and the operator can start the engine. The engine can be started at any time without damage to the AMS-Oiler™, however, the AMS-Oiler™ is recharged by the pressure generated by the engine's oil pump. Complete recharge is accomplished within 40 seconds.

The absence of a gas or air charge eliminates the possibility of cross-contamination of dirty gas or air with the engine oil, keeping the oil pure and performing optimally. The design of the AMS-Oiler™ reservoir also protects the unit from ambient temperature fluctuations.

Specially crafted by AMSOIL technicians, the AMS-Oiler™ is the culmination of extensive research and development. "Our products are exceptional when it comes to reducing wear during operation," said Technical Director Dave Anderson. "The weakest link in the chain, however, was still during startup. With the AMS-Oiler™, we're closing that last gap."

With an extremely rugged chrome plated hi-grade carbon steel reservoir and anodized aluminum base, the AMS-Oiler™ is crafted to withstand severe service and to perform reliably in any personal, commercial or industrial application.

Unlike other pre-charger systems, the AMS-Oiler™ has no bulky moving parts which need maintenance and does not rely on pressurized gas to function. The AMS-Oiler™ is a self contained, streamlined unit that has a mechanical life cycle exceeding one million engine starts, with no maintenance required. The AMS-Oiler™ is self-lubricating with an integrated overpressure protection device that protects units from retaining pressures in excess of 90 p.s.i.

To meet consumers' needs, AMSOIL has designed two AMS-Oiler™ models to cover all applications. The first model, AMK-01, is crafted to attach directly to the AMSOIL Dual-Remote By-Pass Filtration Systems BMK13, 15 through 18. The second model, AMK-02, is designed as a stand-alone system. AMK-01 and AMK-02 are designed for pre-oiling engines up to 500 CID (cubic inch displacement)(8.2L).

Both Models AMK-01 & AMK-01

Model AMK-02 Stand Alone Unit

AMSOIL's Marine Dual Remote Filtration System

The AMS-Oiler™ retro-fit applicability to the AMSOIL By-Pass filtration systems provides a convenient perch for quick installation. The stand-alone AMS-Oiler™ mounts easily at any angle to accommodate virtually every engine.

With the new AMS-Oiler™, AMSOIL continues to make lubrication history, with quality still the number one priority.

Products Models AMK-01, the "bolt on" configuration, is designed for use in combination with the BMK13, 15 through 18 Series Dual Remote Mount Filtration Systems.

AMK-02 is a "stand-alone" configuration designed for universal application. The AMK-02 can be used with any engine application and mounts at any angle.

AMS-Oiler™ Benefits

· Eliminates dry starts, reduces engine wear
· Retrofit with Dual Remote Filtration System
· Compact design, mounts at every angle
· Ideally suited for gas & diesel applications
· Capacity to pre-lube up to 500 CID (8.2L) engines
· Promotes easier starts in extreme cold weather
· Closed system prevents contamination
· Self Lubricating, no maintenance required
· Operational cycle life exceeds 1,000,000 engine starts
· Install and forget

AMS-Oiler™ Market Application

While every engine can benefit from the use of an AMS-Oiler™, vehicles especially prone to frequent starting and engines that sit idle for extended periods of time would extend their engine life with the simple addition of an AMS-Oiler™. An AMS-Oiler™ can provide the instant lubrication necessary to save these engines significant wear and prevent damaging metal-on-metal contact.

· Taxicabs
· Delivery Fleets
· Marine Applications
· Service Vehicles
· Family Vehicles
· Personal Vehicles
· Construction Equipment
· Farm Equipment
· Hobby / Collector / Competition Cars
· Emergency Generators and Pumps
· Tow Vehicles
· Motor Homes
· Cold Weather Application

Note: this concludes AMSOIL INC's description of of the AMS-Oiler (TM). Next, you will find AMSOIL's description of the new Marine Remote Dual Bypass Filtration System.

Hard-working engines come in all shapes and sizes, from heavy-duty diesels to high performance racing engines. Though seldom recognized as part of this group, marine engines include some of the hardest working, hottest running engines out there. Marine engines, from those found in recreational watercraft to larger commercial boats, often sit idle in storage for weeks or months and when put on the water are required to run at full throttle for extended periods of time.

These torturous conditions place tremendous stress on engines and engine oils. Since clean engine oil is critical for ensuring proper operation and protection, AMSOIL recommends the use of the Marine Dual Remote Filtration System (BMK-18).

The AMSOIL Dual Remote and By-Pass filtration systems have been an integral part of the company's advanced engine protection product line. Building on the customer-proven success of automotive dual remote and by-pass filtration technology, the Marine Dual Remote Filtration System was created to address the specific severe operating environment of marine engines in both salt and fresh water. For example the hose fittings are coated with a 3 ml layer of Alumiplate™ and 1 ml of zinc and yellow chromate.

Standard hydraulic fittings typically survive for 96 hours in the grueling ASTM B-117 Salt Spray Test. When we subjected the Alumiplate™ coated AMSOIL Marine Bypass System fittings to this critical corrosion resistance test protocol, they lasted over 1,000 hours! This means the Alumiplate™ coating on the fittings of the AMSOIL Marine Bypass Filtration System are 10 times more corrosion resistant than standard zinc and yellow chromate plated fittings.

While this exclusive Alumiplate™ coating process is expensive, AMSOIL felt this extra margin of system protection was absolutely necessary to provide marine application customers with extraordinary corrosion resistance and protection - and the peace of mind that goes with knowing that the AMSOIL Marine Bypass System is engineered for demanding marine applications. Also, the fasteners and mounting bracket are stainless steel, and the hose are U.S. Coast Guard approved.

The effects of marine engines running predominantly at or near full throttle after extended periods of non-activity include high operating temperatures and increased potential for wear on engine components. The AMSOIL Marine Dual Remote Filtration System offers a clear advantage by providing better oil filtration, increased oil capacity, longer oil and filter life, plus the ability to remove water from the lubrication system. Moisture typically condenses inside engines to combine with residual combustion gases.

The resulting compounds strip beneficial additives from engine oil and act as corrosive substances that further degrade the engine oil and promote engine wear. Humid environments make marine engines especially prone to these conditions. The BMK-18 greatly curbs the effects of moisture and condensation by safely retaining water within the filtration system.

Dual remote filtration is a highly efficient filtering process capable of removing the vast majority of wear causing particles which are in the 5-20 micron range. It also has the ability to effectively remove particles down to 1 micron in size. Furthermore, a dual remote filtration system requires a 1.5 to 2 quart oil volume increase, with the added oil offering increased cooling capabilities.

The additional hoses, fittings, filters and aluminum mount assemblies also allow the engine oil to dissipate heat more efficiently as it passes through the filtration system, extending the service life of both the engine and the engine oil.

Alarge number of marine diesel engines have by-pass oil filtration systems installed by theengine manufacturer. Until now, however, this technology has not been available to smaller pleasure boats and light commercial marine applications.

Depending on the owner's frequency of use, the improved filtration of the Marine Dual Remote system, along with the use of AMSOIL's synthetic lubricants, could completely eliminate oil and filter changes during a typical boating season.

With marine engines located in a relatively confined and remote space within the watercraft, ease of filter access and reduced oil spillage are significant benefits of the Marine Dual Remote System.

The remote mount of the BMK-18 is also compatible with the new AMS-Oiler™ Oil Precharger (AMK-01) for added engine protection during the frequent dry starting that is typical of marine engines that sit idle for even short periods of time.

The BMK-18 is packaged in kit form, which includes the Dual filter mount, mounting hardware, hoses, hose fittings, component parts and installation instructions. In addition, adapter kits of four different sizes enable the BMK-18 to be installed on a wide variety of recreational and light commercial marine engines. The BMK-18 kit offers a new heavy duty, machined aluminum adapter and retaining nut that fits on the existing oil filter mount. Each adapter kit is application specific and must be ordered separately. Please consult BMK-18 Adapter Kit Reference Guide (G-2051) for specific applications. Adapter kits are available for the most popular filter thread sizes. When ordering the BMK-18 request one of the following adapter kits:

· BK-195 for ľ" x 16 thread
· BK-196 for 13/16" x 16 thread
· BK-197 for 18 mm x 1.5 mm thread
· BK-198 for 20 mm x 1.5 mm thread

Also, for ease of installation in some applications, optional 90 degree fittings (BK-199 and BK-200) can be mounted on the filter adapter collar. These parts are also sold separately.

The AMSOIL Marine Dual Remote Filtration System represents the cutting edge of filtration technology-another example of AMSOIL's commitment to providing quality innovations that can benefit consumers everywhere.

The remainder of the text was written by Alquist Enterprises.

How Much Is Your Engine-Saving Investment?

The AMK-01 retails for $338.00. The AMK-02 retails for $400. Applicable taxes and shipping are slightly extra.

You can order these and other AMSOIL products wholesale as a Preferred Customer (PC). On that basis, the the PC sales prices for the AMK-01 and AMK-02, are $294.00 and $348.00, respectively.

Click Here For The Alquist Online Order Center to buy AMSOIL products now.

Email Shirley Alquist for details. To Learn How To Become A Preferred Customer, Click Here.

I Can't Wait To Order My
AMS-Oiler(TM) Right Now.
How Do I Order This Product?

You can order one or more AMS-Oilers (TM) on the Internet or by phone. When you order by phone, have your credit card handy, know which products you want (by model number), and give the operator our customer number, which is #7706.

To place your order by phone, call 1-800-956-5695.

If you are already an AMSOIL Preferred Customer, please phone your order by calling 1-800-956-5695.

To order online at retail prices: click this link

Note: This takes you to the AMSOIL Online Store. On the opening page, on the left, please click "oil filtration and bypass." On the next page, use the drop down box and select "AMK AMS-Oil Prechargers." The progression is self- evident for the remainder of the transaction.

To order online at wholesale prices, saving up to 25% as an AMSOIL Preferred Customer , click here

If you have any questions or difficulties about any of this, please call us 727-545-8547 or:

Alquist Online Ordering Center For AMSOIL Products
TAAN AMSOIL Dealer Training Testimonials
Alquist AMSOIL National Dealer Locator
AMSOIL Videos Page
AMSOIL Sucks? Learn The Truth
Our AMSOIL Distribution Blog
AMSOIL--Simply Explained
AMSOIL Dealer--Simply Explained
AMSOIL Distributor
AMSOIL Lubricants--Simply Explained
AMSOIL Oil Synthetic
Opening Page, AMSOIL Business Section
Shirley's AMSOIL Testimony
John's AMSOIL Testimony
Trade & Consumer Shows
Monthly Printed E-Newsletters
Continuing Education of John & Shirley
Where To Buy AMSOIL in Tampa Bay
AMSOIL Product Benefits
Why Be An AMSOIL Dealer
Why Be An Alquist AMSOIL Dealer
Why Use ALTRUM Nutritional Supplements
Why Dealers Should Market ALTRUM Products
AMSOIL Retail & Commercial Accounts
Buy Products Wholesale As A Preferred Customer
Celebration Of Home Based Business Week
Manufacturer's Reps FAQ

AMSOIL AMS-Oiler Pre-Charger
AMSOIL Motorcycle Oils
AMSOIL DEO Diesel Oils Meet 2007 Emission Standards
Twin Air Filters--ATVs, Dirt Bikes, Etc.

Return To Opening Page Of This Entire Website

Visit Other Major Topic Areas Of This Website

John's Public Speaking, Business Consulting & Business Writing

AMSOIL Products & Distribution Opportunities

Shirley's Awards, Professional Activities, & Publicity

First Internet Christian Church